The default gateway address set manually for the printer is correct.Your current IP address, subnet mask, and default gateway are displayed in C (Network Status). If you cannot change the settings using your printer, make settings using EpsonNet Setup. If the network address is incorrect, set the correct address using the printer's LCD panel.The network address for the printer is the same as the one for other devices.The network address set manually for the printer is correct.Other devices on the network are turned on.If you have checked the above points, perform network setup using EpsonNet Setup.Ĭonfirm IP address, subnet mask, and default gateway setup.Check that devices that want to use the printer, such as the PC, are on the same network.Check that the power is on for devices, such as the PC, that want to use the printer.
EPSON ARTISAN 730 SOFTWARE FOR MAC PC
Check that the PC you want to connect to is turned on.Contact your network administrator for assistance. Confirm that the wireless network name (SSID) of the PC you wish to connect is set up correctly. Perform Ad Hoc setup for your PC, and then perform network setup for your printer again.
If you want to set up an Ad Hoc connection, you need to set up Ad Hoc for your PC first.If you have set up the network using WPS, check whether or not your access point supports WPS.Your wireless network name (SSID) is displayed in C (Network Status) under Network Name (SSID). If you have manually entered the wireless network name (SSID), confirm whether or not your wireless network name (SSID) is correct.Place your printer close to the access point.If it is turned off, turn it on and then perform network setup again. Check that the access point is turned on.Confirm that the router/access point is turned on and the wireless network (SSID) is set up correctly. Messages and solutions for the check itemsġ. Click the items below to go to the messages and solutions.
0 kommentar(er)
